Kubota WR460 combine harvester








In stock
6.858 EUR
( 5.400 EUR + VAT)
( 5.400 EUR + VAT)
Operating Hours | 1589 |
No. of Cylinders | 4 cylinder(s) |
Water-cooled | Yes |
Fuel | Diesel |
Performance: | 60 HP |
Rated RPM | 2700 rpm |
Regulated Rotations | 2920 rpm |
Total Displacement | 2434 ccm |
4 Wheel Drive | Yes |
Forward Transmission | 3 (1x3) gear |
Rear Transmission | 3 (1x3) gear |
Reversible Drive | Yes |
Independent Side Brakes | Yes |
Length | 455 cm |
Width | 188 cm |
Height | 250 cm |
Weight | 2915 kg |
Front Gauge | 55 cm |
Rear Gauge | 55 cm |
Rotary Tiller | No |
Power Steering | Yes |
Power Steering | Yes |
Comment:
Kubota WR460 használt japán parcellakombájn, gabonafélék betakarításához. A gumihevederes járószerkezet, a több fokozatú előtéthajtómű, a hidrosztatikus hajtás magas terepjáróképességet biztosít, akár felázott talajon is megbízhatóan használható. A felépítmény az alvázhoz képest hidraulikusan szintezhető, továbbá a vágóasztal a felépítményhez képest is hidraulikusan szintezhető. A vágóasztal, a felhordószerkezet láncai központi olajozó rendszerrel folyamatos kenést kapnak. A vágóasztal munkaszélessége 150 cm, klasszikus rostás és ventillátoros magtisztító rendszerrel rendelkezik. A cséplődobba a szár nagy része nem kerül be, ezáltal kevesebb szálas anyag kerül a tisztítórostára. A cséplés végén a szálasanyag a kombájn mögé hullik, de szükség szerint szecskázhatjuk is. A tárcsás szecskázó adapter fedelét felnyitva, a szálasanyag aprítás után hullik majd a talajra. A magtartály térfogata kb 700 liter, a magtartály csigás ürítőberendezéssel van ellátva, amely hidraulika segítségével mozgatható, de van lehetőség alsó kifolyású, kézi ürítésre is. A kombájn szervizelés előtt áll.
Kubota WR460 used Japanese parcel harvester for harvesting cereals. The rubber belt running structure, the multi-stage gear unit, the hydrostatic drive ensure high cross-country ability, and can be used reliably even on wet ground. The superstructure can be hydraulically leveled in relation to the chassis, and the cutting table can also be hydraulically leveled in relation to the superstructure. The chains of the cutting table and the application device are continuously lubricated with a central oiling system. The working width of the cutting table is 150 cm, and it has a classic mesh and fan seed cleaning system. Most of the stem does not enter the threshing drum, thus less fibrous material is placed on the cleaning sieve. At the end of threshing, the fibrous material falls behind the combine, but it can also be chopped as needed. By opening the lid of the disk chopper adapter, the fibrous material will fall to the ground after shredding. The volume of the seed tank is about 700 liters, the seed tank is equipped with a screw discharge device, which can be moved with the help of hydraulics, but there is also the possibility of manual emptying with a bottom outlet.