Flail Mower 90 cm, with hydraulic side movement and angular offset adjustment,Sanyo - ZH44 - 1004

Used, Japanese-made roadside mower. The functions can be controlled from the cab. It is driven by the tractor's PTO, with an independent hydraulic system and hydromotor. Y-blade, cutting width 90cm. It is used for cleaning ditch banks, meadows and weedy areas. Its hydraulic side movement allows the machine to be operated sideways, so it can cut next to the tractor wheel. It can be tilted hydraulically, making it excellent for maintaining ditch banks, slopes and slope sides. For cleaning neglected, weedy areas. For crushing grass, herbaceous plants and thinner woody shrubs. For maintaining the edges of roads, fences and ditch banks. Its dead weight is 685kg, so before buying it, check whether your machine can safely handle a device of this size and weight. It can be operated safely with a tractor with a dead weight of around 2500kg. It may be worth adding a wheel weight to the left rear wheel. The machine has a maximum horizontal reach of 3.8 metres or 4.4 metres, depending on the setting of the hydraulic cylinder mounting pins. Detailed specifications of the reach (measured from the tractor centre line): Maximum reach (with boom fully extended): 4.4 m or 3.8 m when refitted. Close cutting range (with boom retracted): By retracting the boom, the mulching head can be retracted right next to the tractor wheel (approx. 1.5-2 metres) for flexible working. Vertical (upward) reach: Approx. 2.5 metres, which also allows cutting of higher hedges and roadside branches in a vertical plane.